Are you looking for a compact bookshelf speaker system that gives you good sound, simple setup, and modern convenience without the need for an external amplifier?
Quick overview of the Edifier Amplified Bluetooth Bookshelf Speaker System, 2.0 Powered Active Speakers 66 Watt RMS – Wooden
You get a pair of powered bookshelf speakers with a built-in amplifier and Bluetooth pairing, so you can stream music from your phone, laptop, or tablet without extra gear. The wooden cabinet and a 10° tilt angle are designed to improve listening clarity at ear level, and the system offers 66 watts RMS total power (33 watts per speaker).
Key features at a glance
These speakers combine modern connectivity with straightforward analog inputs, giving you flexible ways to connect sources. The design focuses on nearfield listening and small-to-medium room use, with a frequency response that covers most music content you’ll play.
Built-in amplifier (33 watts x 2)
You don’t need a separate receiver or amplifier—just plug into a source and play. Because each speaker has amplification built in (33W per speaker), setup is simpler and you avoid the cost and complexity of extra equipment.
Bluetooth pairing capability
You can stream audio wirelessly from compatible devices, so your phone or laptop becomes the primary source without running cables across the room. Keep in mind that the product details don’t list specific Bluetooth codecs, so wireless performance will be what you’d expect from standard Bluetooth implementations (good for music, sometimes less ideal for low-latency gaming).
Frequency response: 55 Hz to 20 kHz
The frequency response indicates solid midrange and treble extension and a reasonable low end down to 55 Hz. You’ll hear punchy bass for pop, rock, and many electronic tracks, but very deep sub-bass below 50 Hz will be limited unless you add a subwoofer.
10° tilt angle
The slightly forward-tilted front baffle aims the sound toward your ears when the speakers sit on a shelf or desk. That small angle can improve imaging and clarity when you’re sitting close to the speakers.
Dual RCA inputs
Two RCA inputs let you keep multiple wired sources connected at once, saving you from constantly swapping cables. That’s handy if you want to keep a turntable, CD player, or TV connected along with Bluetooth streaming.
Product specifications table
Below is a concise table to break down the most relevant technical information for easier comparison and decision-making.
| Specification | Details |
|---|---|
| Model name | Edifier Amplified Bluetooth Bookshelf Speaker System, 2.0 – Wooden |
| Total power (RMS) | 66 W (33 W x 2) |
| Amplification | Built-in amplifier — no external amp needed |
| Frequency response | 55 Hz – 20 kHz |
| Bluetooth | Yes — wireless streaming from compatible devices |
| Inputs | Dual RCA inputs |
| Cabinet material | Wooden finish |
| Tilt angle | 10° forward tilt |
| Configuration | 2.0 powered active speakers |
| Ideal room size | Small to medium rooms, nearfield/desktop listening |
This table gives you a quick reference so you can match the speaker’s capabilities to your setup and listening priorities. If you need deeper low-frequency extension or a larger soundstage, a subwoofer or a larger speaker system would be the next step.
Sound performance overview
When you listen to these speakers, you’ll notice that they favor clarity and natural midrange presence, which is ideal if your primary use is vocal-centric music, podcasts, or streaming. The wooden cabinets add a bit of warmth to the overall presentation, making the sound pleasant for long listening sessions.
Bass and low end
The low end is punchy and controlled for the speaker size, with enough output to satisfy pop, rock, and many electronic tracks at moderate listening levels. If you listen to music heavily dependent on sub-bass (deep EDM, organ, or some movie effects), the lack of extension below 55 Hz means you may feel the need for a subwoofer to reproduce those very low frequencies.
Midrange and vocals
The midrange is where these speakers really shine, with vocals and acoustic instruments sounding natural and forward. You’ll find that vocals sit clearly in the mix, which helps with podcasts, vocal-driven music, and dialogue from movies or TV.
Highs and detail
High-frequency response is generally clean and detailed without sounding overly bright or fatiguing. Cymbals, string overtones, and the upper harmonics of instruments come through with good definition, adding clarity to mixes without being piercing.
Soundstage and imaging
Because of the tilt and cabinet design, the speakers provide a focused nearfield image that’s well-suited for desktop listening or a dedicated listening spot. Imaging is coherent and you’ll be able to locate elements in the stereo field, though you shouldn’t expect an enormous, room-filling soundstage the way a larger floorstanding setup would produce.
Design, build, and aesthetics
You’ll appreciate the simple, classic look of wooden cabinets, which often blend into home decor more naturally than plastic or glossy alternatives. The build quality is solid for the price range, with functional controls and robust connector options.
Cabinet and finish
The wooden cabinet not only looks warm but can help reduce resonance and coloration compared to thin plastic enclosures. That helps maintain a balanced sound and gives a slightly richer tone than comparable plastic designs.
Front baffle and tilt
The 10° tilt is a small but useful ergonomic touch that improves listening at desk height or when the speakers sit on a shelf below ear level. This means you don’t have to raise the speakers on stands or craft extensive isolation unless you’re chasing absolute best performance.
Controls and connectors
The front and rear control layout is straightforward, with volume and input selection being easy to access. Dual RCA inputs on the back let you keep multiple wired devices connected, and Bluetooth adds wireless convenience.
Setup basics and connectivity
Setting these speakers up is simple and quick, especially if you rely primarily on Bluetooth streaming. You’ll also have the option to keep two RCA sources connected simultaneously.
Connecting via Bluetooth
To pair your device, put the speakers into Bluetooth pairing mode and select them from your phone or laptop’s Bluetooth menu. After the first pairing, your device should reconnect automatically when in range and powered on.
Wired connections (RCA)
If you prefer wired connections, plug your source device(s) into the RCA inputs and select the corresponding input. Having two inputs lets you attach a TV or turntable (with a phono preamp) at the same time as another device, so switching sources is a matter of pressing a button.
Power and placement
Plug the included power cable into the active speaker and then connect the passive/second speaker if required by the model’s wiring. Place the speakers on a stable surface, keep them a few inches from the rear wall for better bass performance, and angle them slightly toward your listening position for the best stereo imaging.
Placement and room tips
You’ll get the best results by treating placement thoughtfully rather than just shoving the speakers into any corner. Small shifts in position can make a big difference in bass balance and clarity.
Desktop and nearfield setups
If you’re using these on your desk, position them at ear height with a slight toe-in toward you. The 10° tilt will help, but you can also use small isolation pads or stands to minimize desk reflections.
Shelf or bookshelf placement
When placing on a shelf, allow some air behind the cabinet to avoid boomy bass. If the shelf has a backboard, create a couple of inches of space between the rear of the speaker and the back panel.
Small-room considerations
In small rooms, you’ll want to watch for bass build-up from reflective surfaces. Pulling speakers away from walls and using soft furnishings can reduce unwanted resonance and improve clarity.
Use cases: where this speaker system works best
You’ll find this system particularly well-suited for casual listening, desktop setups, and rooms where you want good sound without a complex system. The combination of Bluetooth and RCA inputs makes it flexible for multiple media sources.
For music listening
These speakers are ideal if you enjoy vocal-heavy genres, acoustic sets, jazz, and pop. They’ll present detail and warmth, and you can stream your favorite playlists or use a CD player or DAC through the RCA inputs for wired listening.
For TV and movies
If your TV situation allows an RCA connection or Bluetooth connectivity, you’ll get clear dialogue and decent impact for everyday movie watching. For cinematic low-end earthquakes and deep rumble, adding a subwoofer will improve immersion.
For gaming
You’ll appreciate the clarity and immediacy for many single-player and casual multiplayer games, particularly those that emphasize music and midrange detail. For competitive gaming where positional audio and very low latency matter, consider a dedicated gaming headset or wired speaker connection to minimize any Bluetooth lag.
For a home office or workstation
These speakers are a great upgrade over typical computer speakers, offering better tonal balance and a more pleasant listening experience throughout the workday. Their compact size and tilt make them well-suited for desk setups.
Setup walkthrough — step-by-step
Follow these steps to get the best results quickly, whether you’re using Bluetooth or wired inputs.
- Choose placement: set the speakers on your desk or a shelf, a few inches from the rear wall. Keep them at or just below ear height with a slight toe-in toward your listening position.
- Power and wiring: plug the active speaker into mains power and connect the other speaker if required. Confirm that power LEDs indicate the system is on.
- Wired connection: connect your source via RCA to Input 1 or Input 2. Select the correct input on the speaker controls.
- Bluetooth pairing: enable Bluetooth on your phone or computer, put the speakers into pairing mode, and select the speaker name when it appears.
- Calibrate listening: play familiar music and adjust the speaker position and volume to your preference. Add a subwoofer if you want deeper bass extension.
These steps should have you listening to music and other media within minutes.
Pros and cons
You’ll want to weigh the advantages and limitations so you can decide whether this speaker system fits your needs and room.
Pros:
- Easy setup with no separate amplifier required; plug and play simplicity.
- Bluetooth streaming alongside dual RCA inputs gives you flexible connectivity options.
- Wooden cabinets and a 10° tilt improve tonal warmth and direct the sound toward your ears.
- Strong midrange and clear highs make vocals and acoustic instruments shine.
- Good value for the amount of power and features you get.
Cons:
- Low-end extension stops around 55 Hz, so very deep bass may be lacking without a subwoofer.
- Bluetooth codec details aren’t specified, so low-latency wireless performance for gaming or movies may vary.
- Powered bookshelf speakers give less upgrade path than a passive speaker plus separate amp solution if you plan extensive system upgrades later.
This summary helps you see where the speaker excels and where adding a component or changing expectations makes sense.
Comparison: who this works for (and who it doesn’t)
You’ll love these if you want a simple, attractive setup that sounds better than typical desktop speakers and supports both Bluetooth and wired connections. If you plan a future audiophile upgrade or want very deep bass, you may prefer a passive speaker system with a separate receiver and subwoofer.
When to choose these speakers
Choose them if you value convenience, clear vocals, and a warm aesthetic without the hassle of pairing multiple components. They’re especially good for desk use, small living rooms, or as part of a simple entertainment setup.
When to consider other options
If you require a high degree of customization, plan to upgrade components over time, or need deep sub-bass at high SPLs for large rooms, consider a passive speaker system with a dedicated amplifier and subwoofer.
Troubleshooting common issues
If you run into issues, many common problems are easy to fix at home with simple checks and adjustments.
Bluetooth pairing problems
If your device won’t pair, turn Bluetooth off and on on both devices, remove the speaker from your device’s known list and attempt pairing again, and make sure no other device is currently connected. Restarting both your speaker and phone/laptop often resolves stubborn pairing issues.
Hum or buzz
A persistent hum usually indicates a ground loop or interference from nearby electronics. Try different power outlets, move cables away from power supplies and routers, and use shielded RCA cables to reduce noise.
One speaker or channel not working
Check speaker connections and verify that the source balance isn’t panned to one channel. If wired, ensure the interconnect cables are fully seated and working. If the problem persists, test the speaker with a different source or contact support.
Maintenance and care
You’ll keep these speakers performing well with a few basic care steps over time. Dust the cabinets and drivers occasionally, avoid exposing the speakers to direct sunlight or high humidity, and use gentle cleaning materials so you don’t damage the finish. If you move the speakers, disconnect power first and handle the drivers carefully.
Protecting the finish
The wooden cabinets look great but can scratch or fade over time if not cared for. Use soft cloths for cleaning and avoid harsh chemicals. Small scuffs can be treated with appropriate furniture polish, but avoid applying liquids near driver areas or electronics.
Electrical safety
Always unplug the speakers before long periods of inactivity, during storms, or when cleaning nearby. Use only the provided power cables or manufacturer-recommended replacements to avoid electrical issues.
Value and pricing perspective
You’ll find that the Edifier Amplified Bluetooth Bookshelf Speaker System offers a strong value proposition for people who want decent power, Bluetooth, and dual analog inputs in a compact wooden package. The total 66 watts RMS provides enough energy for typical listening scenarios, and the convenience of built-in amplification saves you money on separate components.
What to expect for the price
Expect a solid midrange, balanced treble, and controlled bass for small-to-medium rooms without spending a premium. If you add a subwoofer later or pair with a DAC, you can extend the system’s performance even further.
Alternatives and upgrade paths
If you outgrow these speakers, you have clear upgrade paths: adding a powered subwoofer for deeper bass or moving to larger powered bookshelf or floorstanding speakers. If you want more flexibility for future upgrades, consider passive bookshelf speakers plus a separate receiver.
Adding a subwoofer
Pairing a subwoofer will extend the low end and add more impact to movies and electronic music. If your listening leans on the low end, a subwoofer is the most straightforward upgrade to match these speakers’ capabilities.
Moving to a component system
If you plan to expand later, you might switch to passive speakers with a separate amp or receiver to give you more control and room correction options. That path offers more long-term flexibility but requires more investment and setup complexity.
Frequently asked questions (FAQ)
Here are a few questions you might have that can help you decide whether these speakers match your needs.
Q: Will these speakers fill a large living room?
A: In a large living room, they’ll produce clear sound at moderate levels, but they won’t match the low-frequency impact or SPL of larger speakers or a subwoofer-equipped system. You’ll likely need a sub or larger speakers for big rooms or loud parties.
Q: Do these speakers support optical or HDMI input?
A: The listed inputs are dual RCA plus Bluetooth. There’s no mention of optical or HDMI, so you’ll need an analog connection or a converter if your source uses optical or HDMI only.
Q: Is there a headphone output?
A: The product details provided don’t list a dedicated headphone output. If you need private listening, check the physical controls or product manual to confirm available outputs.
Q: How are these for use with a turntable?
A: You can connect a turntable to the RCA inputs if your turntable has a built-in phono preamp or you use an external phono preamp. A turntable without a preamp will need one for proper sound and volume.
Final verdict
If you want a simple, attractive speaker system that gives you solid midrange clarity, usable bass for most music, modern Bluetooth convenience, and easy wired inputs, these Edifier powered bookshelf speakers are a compelling choice. You’ll get immediate, straightforward performance out of the box and a pleasant listening experience for music, TV, and everyday media without the need to assemble a larger audio chain.
You should consider these speakers if you prioritize convenience, good vocal clarity, and a warm aesthetic in a small-to-medium room. If deep bass and ultra-high SPLs are your priority, plan to add a subwoofer or consider a larger system, but for most users looking for a balanced powered bookshelf speaker with Bluetooth and simple input switching, this is a practical and well-rounded option.
Disclosure: As an Amazon Associate, I earn from qualifying purchases.
